Forumradioamatori.it
Modifiche - Forumradioamatori.it non รจ in alcun modo responsabile di eventuali danni subiti, se non sei sicuro di quello che fai lascia perdere e basta!!! => ICOM => Discussione aperta da: RADIOMOD il Ven 04 Gennaio, 21:47 2013
ICOM IC-X2A
EXPANDED RF
Modification Instructions for the IC-W2A Handheld
Two mods, one for Cross Band Repeat and one for extended TX range
1- Remove battery and antenna.
2- Remove screws from back panel and battery plate and open radio.
3- Remove PLL deck and power plate.
4- Unplug VHF & UHF decks.
5- Remove chip diode D22.
6- ATTACH chip diode to location points A & B.
( diode MA133 - ICOM part # 1790000860 ).
7- Reassemble the radio.
8- RESET the CPU ( Push and hold [ FUNCTION ] & A & CLR and turn power ON).
RX Expansion Push and hold # & B & 3 and turn power ON.
Direct Entry Set VFO PL to 100Hz on VHF and UHF !!!
[F] & [SET] to select 1, 10, OR 100 Mhz freq. entry.
Xband Repeater ON Hold [FUNCTION] press [2] and them #
Xband Repeater OFF Push and hold [FUNCTION] & #
Xband Text Push and hold # & [light] & #