Forumradioamatori.it

Modifiche - Forumradioamatori.it non รจ in alcun modo responsabile di eventuali danni subiti, se non sei sicuro di quello che fai lascia perdere e basta!!! => ALINCO => Discussione aperta da: RADIOMOD il Sab 05 Gennaio, 15:54 2013

Titolo: Modifica espansione di banda per Alinco DR119T
Inserito da: RADIOMOD il Sab 05 Gennaio, 15:54 2013

Alinco DR119T

Expanded RF


Remove the two screws from on the top cover and loosen the four side screws (don't have to remove) and remove cover

Cut the single wire (blue) standing up from behind the tuning knob (large knob on left front of rig)

Cover the ends of the wire with tape or heat shrink tubing

Replace cover



When done do a master reset of the rig as per manual- hold F and VFO/M buttons while turning the radio ON. To change bands press function (F) followed by MHZ button.

130 MHZ - 173 MHZ Receive and transmit (130-169.995MHZ )

335 MHZ - 409 MHZ Receive (340-380MHZ band)

810 MHZ - 989.995 MHZ Receive (870-890MHZ band)